S185 Low Carbon Steel Sheet Thickness 16mm 1500mm*8000mm EN10025 For Construction

Descripiton

S185 Low Carbon Steel With Good Weldability Thickness 16mm 1500mm*8000mm EN10025 For Construction

EN 10025 is a set of European standards for hot-rolled structural steel products. Each part of EN 10025 provides specific requirements for chemical composition, mechanical properties, manufacturing processes, and testing procedures. These standards are widely used in Europe for specifying and manufacturing structural steel products in various industries, including construction, engineering, and infrastructure projects. S185 is a non-alloy structural steel grade defined in the European standard EN 10025. It is part of the S series of structural steel grades, which includes S235, S275, S355, and others. S185 is the designation for the specific grade within this series.

The "S" in S185 stands for structural steel, indicating its intended use in structural applications. S185 is a low carbon steel with a nominal carbon content of less than 0.10%. It is known for its good weldability and formability, making it suitable for various construction and engineering applications.

The mechanical properties of S185 include a minimum yield strength of 185 MPa. The exact values for tensile strength, elongation, and impact properties may vary depending on the thickness of the material.

S185 is typically used in general construction, building structures, machinery manufacturing, and other applications where low strength requirements are sufficient. It is often considered a starting point or reference grade for structural steel, particularly in less demanding applications or where cost efficiency is a primary consideration.

Chemical Composition

Mechanical properties Grade:S185

Application

S185, as a low carbon non-alloy structural steel, is commonly used in various applications where low strength requirements are sufficient.

1. General Construction: S185 is often used in general construction projects, such as buildings, bridges, and infrastructure. It can be employed for structural components that do not require high strength levels but still need adequate structural integrity and stability.

2. Machinery Manufacturing: S185 is suitable for manufacturing machinery and equipment components that do not experience excessive stress or load-bearing requirements. Examples include frames, supports, brackets, and non-critical structural parts.

3. Welded Structures: Due to its good weldability, S185 is utilized in welded structures and fabrications. It can be easily joined using various welding processes, making it beneficial for manufacturing welded assemblies in different industries.

4. Agricultural Equipment: S185 may find applications in the manufacturing of agricultural machinery and equipment, such as trailers, implements, and supports. It provides sufficient strength for these applications without the need for higher strength grades.

5. Non-Load Bearing Structures: S185 can be used for non-load bearing structures where strength is not the primary concern. This includes elements like partitions, cladding, non-structural frames, and interior components.

Characteristic

S185, a non-alloy structural steel grade defined in the European standard EN 10025, possesses certain characteristics that make it suitable for specific applications. Here are the key characteristics of S185:

1. Low Carbon Content: S185 has a low carbon content, typically less than 0.10%. This low carbon content contributes to its good weldability and formability, making it easier to work with during fabrication processes such as welding, bending, and shaping.

2. Good Weldability: S185 exhibits good weldability, allowing it to be easily joined using various welding techniques such as arc welding, MIG welding, and TIG welding. It can form strong and durable welds without significant issues like cracking or brittleness.

3. Moderate Strength: S185 provides moderate strength levels, with a minimum yield strength of 185 MPa. It is suitable for applications where low strength requirements are sufficient, such as in general construction, machinery manufacturing, and non-load bearing structures.

4. Ductility: S185 is known for its reasonable ductility, which refers to its ability to deform under tensile stress without fracturing. This characteristic allows the material to absorb energy during deformation, making it more resistant to sudden failures and providing some level of toughness.

5. Suitable for General Structural Applications: S185 is commonly used in general structural applications where its combination of moderate strength, good weldability, and formability is suitable. It is often employed in building structures, machinery manufacturing, welded assemblies, and non-load bearing structures.

FAQ

Q1: What is S185?

A1: S185 is a non-alloy structural steel grade defined in the European standard EN 10025. It is part of the S series of structural steel grades, which includes S235, S275, S355, and others.

Q2: What is the minimum yield strength of S185?

A2: The minimum yield strength of S185 is 185 megapascals (MPa).

Q3: Is S185 weldable?

A3: Yes, S185 exhibits good weldability, allowing it to be easily joined using various welding techniques. It can form strong and durable welds without significant issues like cracking or brittleness.